De:Raymarine-ace: Unterschied zwischen den Versionen

Aus OpenSeaMap-dev
Wechseln zu: Navigation, Suche
(Record track and save to SD-card)
(Geräteliste)
 
(7 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 7: Zeile 7:
 
Die Raymarine-Plotter der Serie "a", "c" und "e" können Tracks auf eine Micro-SD-Karte aufzeichnen. Der Track ist dort in einer Datei "archive.fsh" zu finden. Die Tracks enthalten mindestens Position, Wassertiefe und Zeit. OpenSeaMap kann dieses Format nutzen.
 
Die Raymarine-Plotter der Serie "a", "c" und "e" können Tracks auf eine Micro-SD-Karte aufzeichnen. Der Track ist dort in einer Datei "archive.fsh" zu finden. Die Tracks enthalten mindestens Position, Wassertiefe und Zeit. OpenSeaMap kann dieses Format nutzen.
  
Gilt vermutlich nicht auch für alle älteren Geräte der "C"-Serie (Grossbuchstaben)?
+
Gilt vermutlich nicht für ältere Geräte der "C"-Serie (Grossbuchstaben)?
  
 
== Plotter konfigurieren ==
 
== Plotter konfigurieren ==
  
Bernhard has decoded the format Raymarine plotters (MFD) save recorded tracks in. Fortunately these tracks do contain depth data.
+
Wenn dein Boot mit einem Raymarine Plotter (MFD) und einem Echolot ausgerüstet ist, der wie üblich mit dem Plotter verbunden ist, hast Du alles, um mit dem Aufzeichnen von Wassertiefen zu beginnen. So geht's:  
So if your boat is equipped with a Raymarine plotter and a sonar connected to the plotter (as usually), you are ready to start logging depths. Here is how to:
 
  
Sounding depths is done by recording the track you went, as you would do e.g. to find the way back. These tracks are exported to SD cards, afterwards.
+
Das Aufzeichnen von Wassertiefen geschieht über das Aufzeichnen der gefahrenen Strecke als Track, so wie man das z.B. tun würde, um den Weg zurück zu finden. Diese Tracks werden anschließend auf SD-Karte gespeichert.
  
 
=== Tracking Interval ===
 
=== Tracking Interval ===
By default tracks are recorded with few waypoints at relevant changes of course. As we want to have lots of sounded spots, we need lots of waypoints. So first you should set your plotter to record waypoints in short a tracking interval.
+
 
 +
In der Standardeinstellung werden Tracks mit wenigen Wegepunkten bei relevanter Kursänderung gespeichert. Um möglichst viele Stellen mit Wassertiefen aufzuzeichnen, benötigen wir viele Wegepunkte. Daher sollte man zunächst im Plotter das Aufzeichnen von Wegepunkten in einem kürzeren Intervall einstellen:
 +
 
 
  Go to "Chart > Menu > My Data > Track Set-Up"  
 
  Go to "Chart > Menu > My Data > Track Set-Up"  
 
  and set "Record Track By" to "Distance"  
 
  and set "Record Track By" to "Distance"  
Zeile 45: Zeile 46:
 
: Select SAVE
 
: Select SAVE
  
; Aufzeichnung auf Karte speichern
+
; Aufzeichnung auf SD-Karte speichern
 
: From the HOME screen, select MY DATA
 
: From the HOME screen, select MY DATA
 
: Scroll down and select SAVE DATA TO CARD
 
: Scroll down and select SAVE DATA TO CARD
Zeile 63: Zeile 64:
 
== Hinweise ==
 
== Hinweise ==
  
* There is an mistake in the German translation of the menu item "Save tracks to card" of the Raymarine software. What should be "Tracks speichern" is named "Einstellungen speichern". But it does export the tracks, not the settings, so just go straight forward with the menu item pictured in the document.
+
* Der Menüpunkt "Save tracks to card" ist in der Raymarine Software bis Lighthouse v6.27 falsch übersetzt: Was "Tracks speichern" sein sollte, ist benannt mit "Einstellungen speichern". Exportiert werden jedoch tatsächlich die Tracks, nicht die Einstellungen.  
  
 
* While you can select one ore more tracks to be exported to the SD card or just export all tracks, it always saves a file named archive.fsh to the root of your SD card. Existing files with that name are overwritten without asking. Be careful not to loose previously exported tracks on your card. And keep this in mind when planning to track on holidays. Without renaming archives on the SD card with a PC, there is no way to save several exports to one big SD card. Prefer to take several of smaller SD cards with you and export (and delete) all tracks when the plotters memory is full.
 
* While you can select one ore more tracks to be exported to the SD card or just export all tracks, it always saves a file named archive.fsh to the root of your SD card. Existing files with that name are overwritten without asking. Be careful not to loose previously exported tracks on your card. And keep this in mind when planning to track on holidays. Without renaming archives on the SD card with a PC, there is no way to save several exports to one big SD card. Prefer to take several of smaller SD cards with you and export (and delete) all tracks when the plotters memory is full.
Zeile 71: Zeile 72:
 
== Geräteliste ==
 
== Geräteliste ==
 
{| class="wikitable"
 
{| class="wikitable"
! Gerätetyp || Echolot || Format || Karte || GB || Bemerkungen
+
! Gerätetyp || Echolot || Format || Karte || GB || tested || Bemerkungen
 
|-
 
|-
| a65 ||  ||  ||  ||  ||  
+
| a65 || extern ||  ||  ||  ||  ||  
 
|-
 
|-
| a67 ||  ||  ||  ||  ||  
+
| a67 || intern ||  ||  ||  ||  ||  
 
|-
 
|-
| c95 ||  ||  ||  ||  ||  
+
| c95 || extern ||  ||  ||  ||  ||  
 
|-
 
|-
| c97 ||  ||  ||  ||  ||  
+
| c97 || intern ||  ||  ||  ||  ||  
 
|-
 
|-
| e125 || extern || .fsh || MicroSD ||  ||  
+
| e125 || extern || .fsh || MicroSD ||  ||  ||  
 
|-
 
|-
| e127 || integriert || .fsh || MicroSD ||  ||  
+
| e127 || integriert || .fsh || MicroSD ||  ||  ||  
 
|-
 
|-
| e7 ||  ||  ||  ||  ||  
+
| e7 || extern ||  ||  ||  ||  ||  
 
|-
 
|-
| e7D ||  ||  ||  ||  ||  
+
| e7D || intern ||  ||  ||  ||  ||  
 
|-
 
|-
| e95 ||  ||  ||  ||  ||  
+
| e95 || extern ||  ||  ||  ||  ||  
 
|-
 
|-
| e97 ||  ||  ||  ||  ||  
+
| e97 || intern ||  ||  ||  ||  ||  
 
|-
 
|-
| e125 ||  ||  ||  ||  ||  
+
| e125 || extern ||  ||  ||  ||  ||  
 
|-
 
|-
| e127 || ||  ||  ||  ||  
+
| e127 || intern ||  ||  ||  || {{ok}}
 
|-
 
|-
| e165 ||  ||  ||  ||  ||  
+
| e165 || extern ||  ||  ||  ||  ||  
 
|-
 
|-
| .. ||  ||  ||  ||  ||  
+
| .. ||  ||  ||  ||  ||  ||  
 
|}
 
|}
 +
 +
 +
[[Category:Chart plotter]]

Aktuelle Version vom 26. November 2020, 18:00 Uhr

Deutsch English

Die Raymarine-Plotter der Serie "a", "c" und "e" können Tracks auf eine Micro-SD-Karte aufzeichnen. Der Track ist dort in einer Datei "archive.fsh" zu finden. Die Tracks enthalten mindestens Position, Wassertiefe und Zeit. OpenSeaMap kann dieses Format nutzen.

Gilt vermutlich nicht für ältere Geräte der "C"-Serie (Grossbuchstaben)?

Plotter konfigurieren

Wenn dein Boot mit einem Raymarine Plotter (MFD) und einem Echolot ausgerüstet ist, der wie üblich mit dem Plotter verbunden ist, hast Du alles, um mit dem Aufzeichnen von Wassertiefen zu beginnen. So geht's:

Das Aufzeichnen von Wassertiefen geschieht über das Aufzeichnen der gefahrenen Strecke als Track, so wie man das z.B. tun würde, um den Weg zurück zu finden. Diese Tracks werden anschließend auf SD-Karte gespeichert.

Tracking Interval

In der Standardeinstellung werden Tracks mit wenigen Wegepunkten bei relevanter Kursänderung gespeichert. Um möglichst viele Stellen mit Wassertiefen aufzuzeichnen, benötigen wir viele Wegepunkte. Daher sollte man zunächst im Plotter das Aufzeichnen von Wegepunkten in einem kürzeren Intervall einstellen:

Go to "Chart > Menu > My Data > Track Set-Up" 
and set "Record Track By" to "Distance" 
and set "Track Interval" to an appropriate small distance.

Empfehlung:

Revier Geschwindigkeit Intervall
Flachwasser (<20m) 0..5 kt 2 s
gebaggerte Rinne 5 kt 10 s
Tiefwasser (>20m) 5 kt 20 s

Record track and save to SD-card

Aufzeichnung starten
From the Chart Screen, select MENU
Select NAVIGATE
Select START TRACK
Aufzeichnung stoppen und intern speichern
From the CHART Screen, select MENU
Select NAVIGATE
Select STOP TRACK
Select SAVE
Aufzeichnung auf SD-Karte speichern
From the HOME screen, select MY DATA
Scroll down and select SAVE DATA TO CARD
Select EXTERNAL STORAGE
Select SAVE TRACKS TO CARD
Select SAVE ALL
Select OK

The procedure to record a track and save it to SD-Card is described very good in this document by Navionics

Offset to waterline

The depth recorded in the tracks is the one which is reported to the plotter. It is the depth below the sonar probe plus the offset, which in set in the system (e.g. depth below keel). To know the real depth below waterline, it is important to know the difference to the depth reported by the plotter. So figure out this difference and note it (manually) with the tracks recorded.

Daten hochladen

Die Daten kannst Du direkt auf den Server hochladen.

Hinweise

  • Der Menüpunkt "Save tracks to card" ist in der Raymarine Software bis Lighthouse v6.27 falsch übersetzt: Was "Tracks speichern" sein sollte, ist benannt mit "Einstellungen speichern". Exportiert werden jedoch tatsächlich die Tracks, nicht die Einstellungen.
  • While you can select one ore more tracks to be exported to the SD card or just export all tracks, it always saves a file named archive.fsh to the root of your SD card. Existing files with that name are overwritten without asking. Be careful not to loose previously exported tracks on your card. And keep this in mind when planning to track on holidays. Without renaming archives on the SD card with a PC, there is no way to save several exports to one big SD card. Prefer to take several of smaller SD cards with you and export (and delete) all tracks when the plotters memory is full.

Similar procedures should be possible with plotters of different brands. So if you have one, please have a look at yours and share the exported tracks with the developer list.

Geräteliste

Gerätetyp Echolot Format Karte GB tested Bemerkungen
a65 extern
a67 intern
c95 extern
c97 intern
e125 extern .fsh MicroSD
e127 integriert .fsh MicroSD
e7 extern
e7D intern
e95 extern
e97 intern
e125 extern
e127 intern Ok.png
e165 extern
..