Software logger: Unterschied zwischen den Versionen
(Initial creation, section Linux and Windows) |
(deleted double) |
||
| Zeile 10: | Zeile 10: | ||
[http://opencpn.org opencpn] & # start Chartplotter, setup data source "Network LIBGPS" | [http://opencpn.org opencpn] & # start Chartplotter, setup data source "Network LIBGPS" | ||
gpspipe -r >> my_nmea_data.log # attach to gpsd and append | gpspipe -r >> my_nmea_data.log # attach to gpsd and append | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
== Logging on Windows platform == | == Logging on Windows platform == | ||
Version vom 18. März 2013, 17:37 Uhr
Logging on Linux platforms
Using the GPS daemon gpsd is a convienient way to distribute navigation information to many clients. The gpsd package available for Linux systems provides a set of useful tools for test, simulation and even logging of NMEA data.
The following simple navigation setup has proven to work. Start the following commands from a shell or a script:
gpsd -G /dev/ttyS0 # start the daemon reading the serial GPS interface. Option -G provides data also to other hosts. opencpn & # start Chartplotter, setup data source "Network LIBGPS" gpspipe -r >> my_nmea_data.log # attach to gpsd and append
Logging on Windows platform
It is recommendable to install a software com port-splitter, e.g XPort. Then your chartplotter software and your logger software can each acess a dedicated virtual serial com port.
nmea data to a log file
- you may attach more clients, even on other hosts in your network:
xgps localhost # graphically show satellite coverage
Logging on Windows platforms
It is recommendable to install a software com port-splitter, e.g XPort. Then your chartplotter software and your logger software can each access a dedicated virtual serial com port providing nav data.
