OpenSeaMap-dev:HW-logger/specification

Aus OpenSeaMap-dev
Version vom 16. April 2013, 14:33 Uhr von Markus (Diskussion | Beiträge) (NMEA-0183 HW-Logger)
Wechseln zu: Navigation, Suche

For logging the water depth, users need a black box for doing this...

There are several systems of navigation instruments on board:

1. NMEA-0183 with single GPS and single sounder
2. NMEA-0183 export from a chart plotter, with connected GPS and sounder
3. NMEA-2000 with connected GPS and sounder
4. Chart plotters writing to an SD-card, (W)LAN or USB, with connected GPS and sounder

We need two HW-Loggers:

NMEA-0183
NMEA-2000

Skipper with PC and NMEA-0183 can use our SW-Logger (plus RS-232>USB converter).

NMEA-0183 HW-Logger

Nr what for Connector Remarks
2 NMEA-0183 input Lüsterklemme 2-channel, opto coupler
1 channel switchable to Seatalk-NG
1 SD-card output slot
1 12 V power Lüsterklemme 5..30 V? <100 mA
1 Accelerometer internal Roll and pitch
1 Pulse generator internal Time stamping the sounder- and accelerometer data
1 Battery internal Buffering power interruption. Goldcap?
2 LED operation indicator Power, data on channel A, data on channel B
Processing
Listening to the two ports and the accelerometer
Time stamping the sounder- and accelerometer data by GPS-time plus pulse generator
Merging the data
Writing the merged data continuously into a file to the SD-chard
Starting new files
Handling of powerdown (closing the file)
Body
Standard (no IPx)
Mountable by 2 screws on wood
3x2 Lüsterklemme, 1x SD-Card-slot
3 LED

NMEA-2000 HW-Logger

Nr what for Connector Remarks
1 NMEA-2000 input MicroC opto coupler
1 SD-card output slot
1 12 V power Lüsterklemme 5..30 V? <100 mA
1 Accelerometer internal Roll and pitch
1 Pulse generator internal Time stamping the sounder- and accelerometer data
1 Battery internal Buffering power interruption. Goldcap?
2 LED operation indicator Power, data recording
Processing
Listening to the NMEA-port and the accelerometer
Time stamping the sounder- and accelerometer data by GPS-time plus pulse generator
Merging the data
Writing the merged data continuously into a file to the SD-chard
Starting new files
Handling of powerdown (closing the file)
Body
Standard (no IPx)
Mountable by 2 screws on wood
1x2 Lüsterklemme, 1x MicroC, 1x SD-Card-slot
3 LED

Raspberry-Pi Logger

Raspberry-Pi

Raspberry-Pi Sensor-Modul
und ausbaufähiges Gesamtsystem zur Datenaufzeichnung:

Features:

Mechanisch

   Leiterplatte, auf GPIO-Pfostenstecker des Raspberry Pi zu montieren
   Montageloch fuer Distanzbolzen ueber Montageloch auf RasPi
   Gehaeuse zur Aufnahme von Raspberry-Pi + Sensor-Board, Zuleitungen, etc
   Schutzklasse IP.., Waermeabfuhr (3W) muss moeglich sein durch Konvektion, Oberflaeche
   Zugentlastungen fuer Anschlussleitungen, Luesterklemmen
   Loetanschluss fuer SeaTalk/NMEA-Kabel auf Sensor-Modul
   Pfostenstecker mit durchgeschleiften GPIO-Kontakten
   Nice to have: Kompatibilitaet mit existierenden Modulen

Elektrisch

   Stromversorgung ??
   optoentkoppelte RS-485 Schnittstelle
   optoentkoppelte RS232  Schnittstelle mit Kollisionserkennung (Seatalk), Host
   RGB-LED(s) an 3 GPIO-Pins
   Sensoren:
     an SPI oder I2C-Bus, soweit moeglich - SW-Driver??
     Luftdruck-Sensor
     Temperatur-Sensor
     3-Achs-Beschleunigungssensor
     3-Achs-Magnetfeldsensor
     Gyro
     AD-Wandler, siehe auch
   option
     RTC-Baustein mit Puffergoldcap???
     CAN-Schnittstelle????
     Strom-Sensoren und AD-Wandler fuer Batterieueberwachung ??
     PWM-Poweramp zur Ansteuerung eines Sounders? Mixer, OpAmp, AD/Wandler
   EMV-Vertraeglichkeit:
     Robust gegen Stoerungen im HF, VHF, L-Band (ISM 2.45GHz)
     Keine Stoeraussendungen in HF und VHF Baendern, die Seefunk oder GPS beeintraechtigen

Peripherals

Sache des Benutzers? Recommended Hardware?

   USB
     WLAN z.B. Logilink WL0084B (Pollin, 5,95EUR) - gibt es auch solche, die als Router funktionieren?
     USB-Seriell Adapter
     GPS, z.B. Navilock NL-464US (ELV, 29,95EUR)
     Memory-Stick
     USB-Hub
     UMTS-Modem
   Sonstige
     SD-Card, mindestens 8GB fuer Betriebssystem (4GByte) und Logs (4GByte)
   Optionale Erweiterungen
     Bildschirm
     Audio-Ausgang
 Stromversorgung
   siehe oben, 12-5 Step-Down, Micro-USB oder/und 220V Steckernetzteil, (Pollin, 3,95EUR)

Links

Was es schon alles zu Raspberry-Pi gibt:

Gertboard2
A/D-Wandler
Display
Pressure Sensor

Ideas

see discussion page...

Solutions

SW-Logger of Jens
TP-Link-HW-Logger of Victor