OpenSeaMap-dev:HW-logger/Bus: Unterschied zwischen den Versionen

Aus OpenSeaMap-dev
Wechseln zu: Navigation, Suche
(Elektrische Daten)
(Elektrische Daten)
 
(5 dazwischenliegende Versionen von 2 Benutzern werden nicht angezeigt)
Zeile 1: Zeile 1:
 +
{{Vorlage:dev:Water_depth}}
 +
 
== Elektrische Daten ==
 
== Elektrische Daten ==
 
{| class="wikitable"
 
{| class="wikitable"
 
! System || V || A || R || Übertr. || Stecker || Kabel || Remarks
 
! System || V || A || R || Übertr. || Stecker || Kabel || Remarks
 
|-
 
|-
| NMEA-0183 || 0/5 ||  ||  || 4800 Baud || Screw || 2-adrig ||
+
| NMEA-0183 || ±2v Diff ||  ||  || 4800/38400 Baud || Screw || 2-adrig ||
 
|-
 
|-
| Seatalk-1 || ||  ||  ||  || Screw, Seatalk || 3-adrig ||  
+
| Seatalk-1 || 0/+12v SE ||  ||  ||  || Screw, Seatalk || 3-adrig || Power 12V/150mA
 
|-
 
|-
| NMEA-2000 || ±2,5 ||  ||  || 250 kBit || MicroC, NMEA-2000, Simnet || 4-adrig plus Masse || CAN-Bus, Adapterkabel erforderlich  
+
| NMEA-2000 || ±2,5v ||  ||  || 250 kBit || MicroC, NMEA-2000, Simnet || 4-adrig plus Masse || CAN-Bus, Adapterkabel erforderlich  
 
|-
 
|-
| Seatalk-NG || ||  ||  ||  || MicroC, NMEA-2000, Simnet || 4-adrig plus Masse || CAN-Bus, Adapterkabel erforderlich   
+
| Seatalk-NG || ±2,5v ||  ||  ||  || MicroC, NMEA-2000, Simnet || 4-adrig plus Masse || CAN-Bus, Adapterkabel erforderlich   
 
|-
 
|-
| Seatalk-HS ||  ||  ||  || || MicroC, NMEA-2000, Simnet || 4-adrig plus Masse || CAN-Bus, Adapterkabel erforderlich  
+
| Seatalk-HS ||  ||  ||  || 10/100MHz || RJ45 || 8-adrig plus Masse || Ethernet, Adapterkabel erforderlich  
 
|-
 
|-
| RS-232 || ±8 ||  ||  ||  || Sub-D ||  ||  
+
| Signal-K || ||  ||  ||  || ||  ||  
 
|-
 
|-
| USB || 0/5 ||  ||  ||  || USB A ||  ||  
+
| RS-232 || ±8V SE ||  ||  ||  || Sub-D ||  ||
 +
|-
 +
| USB || 0/5V ||  ||  ||  || USB A ||  ||
 +
|}
 +
 
 +
== Hersteller ==
 +
{| class="wikitable"
 +
! Hersteller || 0183 || 2000 || ST-1 || ST-NT || ST-HS || SimNet || Remarks
 +
|-
 +
| B&G (Navico) || x ||  ||  ||  ||  ||  ||
 +
|-
 +
| Furuno || x || x ||  ||  ||  ||  ||
 +
|-
 +
| Garmin || x || x ||  ||  ||  ||  ||
 +
|-
 +
| Humminbird || x ||  ||  ||  ||  ||  ||
 +
|-
 +
| Lowrance (Navico) || x || x ||  ||  ||  ||  ||
 +
|-
 +
| Maretron || x || x ||  ||  ||  ||  ||
 +
|-
 +
| Navico || x ||  ||  ||  ||  ||  ||
 +
|-
 +
| Raymarine || x ||  || x || x || x ||
 +
|-
 +
| Simrad (Navico) || x ||  ||  ||  ||  || x ||
 +
|-
 +
| .. ||  ||  ||  ||  ||  ||  ||
 +
|}
 +
 
 +
== Geräte ==
 +
{| class="wikitable"
 +
! Hersteller || Modell || nativ || 0183 || Remarks
 +
|-
 +
| Raymarine || ST60 Multi || Seatalk-1 || DBT, HDG, HDM, MTW, VHW, MWV ||
 +
|-
 +
| Raymarine || ST70 || Seatalk-1 || ? ||
 +
|-
 +
| Raymarine || ST80 || Seatalk-1 || ja ||
 +
|-
 +
| Raymarine || Radar || Seatalk-1 || ja ||
 +
|-
 +
| Raymarine || Plotter || Seatalk-1 || ja ||
 +
|-
 +
| Raymarine || Autopilot || Seatalk-1 || ja ||
 
|}
 
|}
  

Aktuelle Version vom 20. Februar 2018, 18:52 Uhr

dev: Water depth
depth-Website
Crowd Sourced Depth Data
Depth raw data
Depth meta data
Depth data processing
User login
Bordnetz
NMEA-Logger anschliessen
Hardware loggers
- Specifications
- NMEA-0183-2-Kanal-Logger
- NMEA-2000-Logger
- WLAN-NMEA-0183 mit TP-Link
- NMEA-0183-Logger mit Arduino
- WLAN-NMEA-2000-Logger mit Raspberry Pi
NMEA-0183-SW-Logger Jens
proprietäre Formate
Bus
Mess-Strategie
Mobiler Tiefenmesser
NMEA

Elektrische Daten

System V A R Übertr. Stecker Kabel Remarks
NMEA-0183 ±2v Diff 4800/38400 Baud Screw 2-adrig
Seatalk-1 0/+12v SE Screw, Seatalk 3-adrig Power 12V/150mA
NMEA-2000 ±2,5v 250 kBit MicroC, NMEA-2000, Simnet 4-adrig plus Masse CAN-Bus, Adapterkabel erforderlich
Seatalk-NG ±2,5v MicroC, NMEA-2000, Simnet 4-adrig plus Masse CAN-Bus, Adapterkabel erforderlich
Seatalk-HS 10/100MHz RJ45 8-adrig plus Masse Ethernet, Adapterkabel erforderlich
Signal-K
RS-232 ±8V SE Sub-D
USB 0/5V USB A

Hersteller

Hersteller 0183 2000 ST-1 ST-NT ST-HS SimNet Remarks
B&G (Navico) x
Furuno x x
Garmin x x
Humminbird x
Lowrance (Navico) x x
Maretron x x
Navico x
Raymarine x x x x
Simrad (Navico) x x
..

Geräte

Hersteller Modell nativ 0183 Remarks
Raymarine ST60 Multi Seatalk-1 DBT, HDG, HDM, MTW, VHW, MWV
Raymarine ST70 Seatalk-1 ?
Raymarine ST80 Seatalk-1 ja
Raymarine Radar Seatalk-1 ja
Raymarine Plotter Seatalk-1 ja
Raymarine Autopilot Seatalk-1 ja

Stecker

Steckerkompatibilität
Stecker für NMEA-2000, MicroC, Simnet, CAN unterscheiden sich nur mechanisch.
Elektrisch enthalten sie 2 Adern für Daten, 2 Adern für 12V Stromversorgung, Schirm als Masse.
MicroC könnte markenübergreifender Standard werden.
Adapterkabel "MicroC > proprietärer Stecker" sind dann nur noch für Geräte ohne MicroC erforderlich.
Auch eine Lüsterklemme ist möglich.
Steckerformen